Now that you are familiar with the equipment provided by Propify, it is time to assemble the hub for activation. Please follow the steps below.
- Remove all of the items from the Propify box.
- Screw on each antenna to its corresponding side. Each antenna and antenna port is labeled with either 4G or WiFi to help distinguish where each antenna belongs.
- Plug the power cord into the power port, located on the back edge of the Hub.
- Plug the power cord adapter into a suitable outlet. The best outlet is one closest to the front door, which will help with receiving 4G cellular reception. If this is not feasible, use an outlet near a window in close proximity to the door.
- Wait for the two (2) LED lights on the hub to turn green. Do not continue to activating the hub until both lights are solid green.
- If the lights are not turning green Click Here.
Note: The location of the hub must receive adequate 4G signal AND keep close proximity to the supporting Smart Home devices.
- DO NOT plug the hub into an outlet in the kitchen.
- DO NOT leave the hub in a cabinet or on top of any kitchen appliances.
- DO NOT leave the hub laying on the ground.
Continue Reading: Activating The Propify Hub.