Every Smart Lock requires four (4) AA batteries to operate.


It's important to ensure that the Smart Lock batteries are at a charge level greater than 60% before leaving the home.  

This article discusses how to change the batteries in each lock type that is currently compatible with Propify:


TABLE OF CONTENTS

 

YRD110

  • The batteries in the YRD110 model can be replaced by loosening the screw on the the battery cover with a Phillips-head screwdriver.






YRD 136 

  • The batteries in the YRD136 model can be replaced by using a push-pin to remove the battery cover.
  • Every YRD136 model is shipped with a push-pin to remove the cover.






YRD256 and YRD652

  • The batteries in the YRD256 and YRD652 can be replaced by unscrewing the battery cover with a Phillips-head screwdriver. 






  • NOTE: The green cartridge inserted above the Lock's body is a Z-Wave adapter. Do Not Remove the Z-Wave cartridge.


Kwikset 620

The Kwikset Smart Lock has a different battery compartment than the Yale Locks mentioned above.

  1. Push the cover upwards with your hand.




2. Use the battery-pack Tab to lift the battery-pack out of the housing.


(inside, bolt side of Lock)



(outside, keypad side of Lock)