1. To begin pairing the YRD110 lock to the Propify Hub, press the Add Device button on the Propify installation Guide.

2. Under "Available Devices to Pair", select Yale YRD110 Smart Lock.

3. With a Phillips-head screwdriver, remove the battery cover from the YRD110 lock.  This will reveal the Z-Wave pairing button used in future steps.  The batteries will remain in the lock.






4. On the Propify Installation page, press the Exclusion Mode button. The Propify Hub will search for a device that can be cleared of any additional pairings. Since a lock can only be paired to one hub at a time, this step must be taken.



5. After pressing the Exclusion Mode button, press the Z-Wave pairing button and hold it down. The lock will make five (5) beeping noises, which indicates the lock is already paired to another device.  Once the beeping stops, you may release the Z-Wave pairing button.   
  • If this step is successful, the lock itself will make three (3) soft chime noises. At this point, you may continue to the next step.   
  • Note: If the lock only beeped two (2) times when holding down the Z-Wave pairing button, you may continue to the next step regardless of the final sound. 
  • If this step failed, the lock will make six (6) loud-flickering noises. If you hear this noise, please repeat steps 4 and 5. If this fails multiple times, contact the Propify Smart Home Team at 630-647-5444.   

 

6. On the Propify Installation Guide, press the Inclusion Mode button.  The Propify hub will now begin broadcasting a signal that allows another device to connect to it.  



7. After pressing the Inclusion Mode button, press the Z-Wave pairing button and hold it down.  The lock will make two (2) beeping noises, which indicates the lock is free and ready to look for an available smart system.  Once the beeping stops, you may release the Z-Wave pairing button.   
  • If this step is successful, the lock itself will make three (3) soft chime noises. At this point, the Propify Installation page will redirect you back to the home screen.   
  • If this step failed, the lock will make six (6) loud-flickering noises. If you hear this noise, please repeat steps 6 and 7.  If this fails multiple times, contact the Propify Smart Home Team at 630-647-5444.

 

Once the lock is paired move on to Available Thermostats. 


If the lock is not connecting after multiple attempts, Click Here.